Canon MP460 Driver Download

Canon MP460 Driver Download

Canon MP460 Driver Download

Canon MP460 Driver Download – Canon MP460 With one machine, you can print lovely, dependable photographs and laser-quality content. Copy imperative reports with comes about that are more devoted to your firsts. Also, scan photographs or structures, even thick scratch pad. The 1.9″ shading LCD show gives you a chance to upgrade pictures before you print for better pictures. Besides, you can print from your PC, or direct from memory cards, cameras, Bluetooth gadgets, even camera telephones.

From a style perspective, the Canon PIXMA MP460 is a calamity, as it looks enormous and square shaped, while the inclining top is basically unappealing.

This isn’t simply a question of beauty care products as the scanner bed is likewise set at an edge, rather than lying on a level plane; this isn’t a general issue, however it makes it fiddly to set up your copy effectively. The outline likewise implies the paper input bolster holds the pages near the vertical and could be more considerable, while the overlap down yield plate is short.

Introducing the Canon is a snappy activity, as you just module the combine of cartridges and run the CD. Despite the fact that the product bundle comprises of MP Navigator, Easy PhotoPrint, Adobe RGB, Easy WebPrint, ArcSoft PhotoStudio 5.5 and ScanSoft OmniPage SE 4.0, it ‘s a single tick process. Uninstalling the product when we had completed was an alternate story as we needed to evacuate each bit of programming exclusively.

Canon Ij Network WPS Connection Method

Before installation started, there are a few conditions that should consider:

  • If your printer does not support Network Printing, Please Proceed to step 3.
  • To use the WPS push button method, The physical WPS push button should be available on the router or access point. MAke sure by doing double check your device’s user manual.
  • The network should be on the WPA (Wi-Fi Protected Access) or WPA2 security protocol. Most WPS enabled access points use this protocol.

Step 1

  • Please be sure the printer has been turned on.
  • Press & hold the [Wi-Fi] button [MASTER] Picture_PIXMA Wireless Connection Wifi button on the top of the printer until the alarm lamp flashes once.

Step 2

  • Please be ensure that the lamp next to the button starts blinking blue, so that you can to your access point and press the [WPS] button within 2 minutes.
  • The more detail explanation on how starting WPS on your access point, please refer to its user manual.
  • The (blue) Wi-Fi lamp flashing indicates that the printer is still searching the connection and when connecting to the access point.
  • After the printer has successfully made a connection to your wireless network, the power and Wi-Fi lamp will stop flashing and remain lit.

Step 3

  • Now please proceed the procedure by installing the driver software to complete the installation process of Canon Printer
  • You need the driver software or installation CD that included in the printer box.
  • If you do not have them both, you can download software from the table below based on your Operating System Version.
  • To run the Installation process, please double click on the driver software file.
  • Follow the instruction that pop up during installation, Click Next when it is asked.
  • When the installation has successfully finished, the printer is ready to use to print or scan.

Canon MP460 Driver Download Links

Windows 32bit
Windows 64bit

OS X 10.9,OS X 10.8
Mac OS X 10.6

Linux 64bit
Linux 32bit

Canon MP460 Driver Download

Add a Comment

Your email address will not be published. Required fields are marked *