Canon iP1800 Driver Download

Canon IP1800 Driver Download

Canon IP1800 Driver Download

Canon IP1800 Driver Download – Canon Pixma iP1800 is an entry-level printer, photo arranged, one-job and is the successor to the Pixma iP1700. Estimated at 6 by 17.4 by 9.3 inches (HWD), the iP1800 is quite a bit to fit where you might need it. General settings for ink fields: Install, turn on, and introduce dark and tri-color cartridges. At that time run the programmed program and the USB link module when the program asks you. the printer combines spouts in cartridges, so there are no different print heads to introduce.

Furthermore, the Canon iP1800 is a levity model. Its dark body estimates 17.4 inches wide, 6 inches high, and 9.3 inches wide, and weighs 7.3 pounds of light-boast. The folds support the open base paper from above, and are equipped with paper that can be balanced. Unfortunately, there are no results trays; The printed page is only ejected from the front of the printer, so be sure to set the printer far enough behind your work area or work area so that the page does not fall to the ground.

Also, the Pixma iP1800 uses two tank ink frames: one dark tank and one tricolor tank (cyan, yellow, red). Changing the tank is a simple job: when you open the printer body, the print will enter the show. Simply send a drained tank and enter the others.

In general, the iP1800 scanners are decent printers. It needs more and more if the quality of the content is rather better. However, this content is sufficient for most individual and business needs, illustrations and photos are all that anyone can need, and their implementation is useful at a cost. Everything shows a decent of the copier decision if you need a printer for home, office, or apartment.

Canon Ij Network WPS Connection Method

Before installation started, there are a few conditions that should consider:

  • If your printer does not support Network Printing, Please Proceed to step 3.
  • To use the WPS push button method, The physical WPS push button should be available on the router or access point. MAke sure by doing double check your device’s user manual.
  • The network should be on the WPA (Wi-Fi Protected Access) or WPA2 security protocol. Most WPS enabled access points use this protocol.

Step 1

  • Please be sure the printer has been turned on.
  • Press & hold the [Wi-Fi] button [MASTER] Picture_PIXMA Wireless Connection Wifi button on the top of the printer until the alarm lamp flashes once.

Step 2

  • Please be ensure that the lamp next to the button starts blinking blue, so that you can to your access point and press the [WPS] button within 2 minutes.
  • The more detail explanation on how starting WPS on your access point, please refer to its user manual.
  • The (blue) Wi-Fi lamp flashing indicates that the printer is still searching the connection and when connecting to the access point.
  • After the printer has successfully made a connection to your wireless network, the power and Wi-Fi lamp will stop flashing and remain lit.

Step 3

  • Now please proceed the procedure by installing the driver software to complete the installation process of Canon Printer
  • You need the driver software or installation CD that included in the printer box.
  • If you do not have them both, you can download software from the table below based on your Operating System Version.
  • To run the Installation process, please double click on the driver software file.
  • Follow the instruction that pop up during installation, Click Next when it is asked.
  • When the installation has successfully finished, the printer is ready to use to print or scan.

Canon iP1800 Driver Download Links

Download
Category
Windows 32bit
Windows 64bit

Download
Category
OS X 10.9,OS X 10.8
Mac OS X 10.6

Download
Category
Linux 64bit
Linux 32bit

Canon IP1800 Driver Download